Honed tube is usually used as Hydraulic cylinder barrel for manufacturing and repairing hydraulic cylinders. It is known as hydraulic cylinder tube also.
Hydraulic cylinder tube usually is produced by method of honing or skiving & roller burnishing, using “Suitable To Hone” Cold Drawn Seamless Tube or drawn over mandrel tube, so it is also called honed cylinder tube. The machining method of the honed cylinder tube is determined by the size, mold available and the request of the customer.
Materials of our Hydraulic cylinder tubes:
Our honed tubing usually are made from grades SAE 1020, SAE 1026, E355 and ST52.3. Omong these materials, the material DIN2391 / ST52.3 is the most popular steel grade.
The chemical compostion of ST52.3 is:
Chemical composition % of steel ST52.3 (1.0580)
|
P max =0.025%; S max =0.025%; Al min =0.02% (EN 10305-1:2010)
|
|
C
|
Si
|
Mn
|
P
|
S
|
|
max 0.22
|
max 0.55
|
max 1.6
|
max 0.045
|
max 0.045
|
We also produce hydraulic cylinder tubes in other materials on customers’ request.
Hydraulic cylinder tube Size Range:
As one of the leading honed tube suppliers in China, our factory produce honed cylinder tubes in a wide range of metric sizes and imperial sizes.
Inside Diameter 32mm to 600mm; Imperial sizes inner diameter 1.25 inch to 24 inch.
We supply our hydraulic cylinder tubing in fixed length and random lengths, the max. Length our our honed tube is 14 meters.
Applications:
Younglee's Honed steel tubing is mostly applied for producing and repairing hydraulic cylinders and pneumatic cylinders, and our honed steel tubing is ready to use as hydraulic cylinder barrels without any further inside diameter machining.
